Detail produk:
Syarat-syarat pembayaran & pengiriman:
|
SMPTE Standard: | 425M Level A & B, 424M, 292M, 259M-C | SDI Transmission Rates: | 2.970 Gbit/s and 2.970/1.001 Gbit/s |
---|---|---|---|
CVBS Output Resolution: | PAL/NTSC-M | Input Port: | 1 x BNC (SD/HD/3G-SDI) |
Output Port: | 1 x BNC (SD/HD/3G-SDI), 3 x RCA (CVBS,L/R) | Power Supply: | DC 5V -12V |
Dimension: | 95mm x 60mm x 25 mm | Weight: | 260g |
Cahaya Tinggi: | hd tvi converter,cctv camera video converter |
1-port BNC (SD/HD/3G-SDI) + 3-port CVBS 3G-SDI to AV Scaler Converter
Overview
The LNK-SA001 SDI to AV scaler converter allows SD-SDI, HD-SDI and 3G-SDI signals to be shown on CRT or HDTV while ensuring high bit rates of 2.970 Gbit/s to give you fast signal transmission without any loss. For professionals this means that it is now easier to distribute and extend your 3G SDI signal while giving you the ability to display your work on TV thanks to the built in this converter. Furthermore, thanks to the loop-through 3G-SDI design, users are able to enjoy both SDI and AV at the same time.
Features
Note: Cable tested with Belden 1694A. Operating distances may vary if used with another type of cable.
Technical Indexes
Parameter | Specifications |
SMPTE Standard | 425M Level A & B, 424M, 292M, 259M-C |
SDI Transmission Rates | 2.970 Gbit/s and 2.970/1.001 Gbit/s |
SDI in/out Resolution |
SD: 480i@60, 576i@50 HD:720p@50/60, 1080i@50/60 3G:1080p@24/25/29.97/30/50/59.94/60 |
CVBS Output Resolution | PAL/NTSC-M |
Input Port | 1 x BNC (SD/HD/3G-SDI) |
Output Port | 1 x BNC (SD/HD/3G-SDI), 3 x RCA (CVBS,L/R) |
Power Supply | DC 5V -12V |
ESD Protection Human body model |
±8kV (air-gap discharge) , ±4kV (contact discharge) |
Dimension | 95mm x 60mm x 25 mm |
Weight | 260g |
Operating Temperature | 0°C ~ 40°C / 32°F ~ 104°F |
Storage Temperature | -20°C ~ 60°C / -4°F ~ 140°F |
elative Humidity | 20 ~ 90% RH (Non-condensing) |
Power Consumption (Max) | 5W |
VI: Operation Controls and Functions
Front Panel Rear Panel
(1) SDI IN: This slot is where you connect the SDI source output for SDI signal sending to be display on screen.
(2) Power LED: This red LED will switch on when the device is connected with the power supply.
(3) POWER LED: This red LED will illuminate when the device is connected with power supply.
(4)DC IN: Plug the 5V-12V DC power supply into the unit and connect the adaptor to AC wall outlet.
(5)CVBS out format: Press this switch to select the CVBS output format .
(6)AV output: This slot is where you connect the TV with RCA calbe
Kontak Person: Mr. Michael Guo
Tel: 19928768315
Faks: 86-755-8312-8674
E-Link Gigabit Power Over Ethernet Injector 12 ~ 48VDC Input Daya DIN Rail / Wall Mount
Satu Port 60W Perangkat Power Over Ethernet Mendukung Instalasi Din Rail / Wall Mount
10/100 / 1000Mbps High Power Poe Injector 100 Watt 802.3bt 100m Transmisi
48 Volt 2 Port Cisco POE Power Over Ethernet Injector 10 / 100 / 1000Mbps 15.4W
Mini 4K HDMI Optical Extender Input USB Multimode Tidak Terkompresi 300M
4K SFP LC 80km HDMI Fiber Extender 10.3Gbps Single Mode Fiber Extender
SFP 5VDC HDMI Over Fiber Optic Extender Port USB Mikro 4K 80Km
4K * 2K HDCP 10.3Gbps HDMI Fiber Extender SFP LC Dengan Audio Eksternal
Mini 3G/HD-SDI ke Fiber Converter Extender dengan fungsi Tally atau Data RS485
3G-SDI SDI Ke Fiber Optic Converter Video Extender melalui Transmisi Panjang Fiber 20KM
HD SDI To Fiber Optic Converter with Forward Audio
Ethernet over Fiber Converter SD/HD/3G-SDI + RS485/RS422/RS232 Data + 10/100M